CEDEC PE - ELECTROFUSION UNDER PRESSURE SADDLE

Electrofusion under pressure saddle CEDEC PE applications
Saddles with an exclusive connection system for installing PE service branching under pressure on polyethylene pipes for up to nominal maximum pressure of 16 bar in water.

Type of connection
At the top of the electrofusion Cedec saddles there is a connection for PE pipes. The lower part can be welded by means of electrofusion to any type of polyethylene pipe with a maximum SDR11 thickness.

EPDM joint with WRAS and ACS Certificates
All Torre saddles are equipped with EPDM joints with drinking water certificates.
WRAS (Water Regulations Advisory Scheme)
ACS (Attestation de Conformité Sanitaire).

Spatula shut off To carry out the under pressure connection operation the water flow is interrupted by means of inserting the spatula that is supplied with the drilling equipment.

Exclusive connection system
The Cedec saddle direct system for connection under pressure is an exclusive system that enables the PE service connection pipe to be joined directly to the saddle, being fastened by means of a floating clamp, providing maximum anchoring with minimum assembly effort.

Convenient installation
The compact nature of the Torre drilling equipment and the strap anchoring system make it possible for these collars to be installed in places with restricted access and in any vertical, horizontal or sloping position.

Capping off service connections
By loosening the nut and inserting the spatula, repair work can be carried out on the service connection network or the tapping can be capped off by means of inserting a PE plug.

Storage advantages
Each box comes with a brochure including detailed assembly instructions along with an information sheet detailing the range of applications and the size of milling cutter that should be used.