Tees with exclusive connection system for installing PE service branching under pressure on polyethylene pipes for pressure up to 16 bar in water.

Connection type

At the top of the electrofusion Cedec branch tees there is a connection for PE pipes. The lower part can be welded by means of electrofusion to any type of polyethylene pipe with a maximum SDR11 thickness.

Drinking water certificated

Torre® saddles are equipped with EPDM joints certified for use with drinking water under WRAS: “Water Regulations Advisory Scheme” and under ACS: “Attestation de Conformité Sanitaire”.

Spatula shut off

To carry out the under pressure connection operation, water flow is interrupted by insertion of a stainless steel spatula supplied with each Cedec equipment.

Exclusive connection system

Cedec tee system is an exclusive design that enables PE service connection pipe to be directly joined to the saddle, being fastened by means of a floating clamp, that provides highest anchoring strength with minimum assembly effort.

Convenient installation

Compact design of Torre® drilling tool and strap anchoring system, both enable to install Cedec branch tees in restricted access spaces in any vertical, horizontal or inclined position.

Capping off service connections

By loosening the nut and inserting the spatula, repair work can be carried out on the service connection network or tapping can be capped off by inserting a PE plug.

Storage advantages

Saddles and straps alike are supplied in labelled boxes to make handling, storage and identification easier. Each box comes with a brochure including detailed assembly instructions along with an information sheet detailing the range of applications and the size of drilling cutter that should be used.

Technical data


Download PDF